tecan Te-VacS - Waste Bottle; Tubing and Cables

9 - Spare Parts and Accessories
Waste Bottle
Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0 47 / 54
9.2 Waste Bottle
No Plain Text Designa-
tion
SAP No Label Designation
1 Complete waste bottle
with 4 connectors (in-
cluding floating switch,
sealings, etc.).
30013321 BOTTLE WASTE 4L TE-VACS
SPARE
2 4l waste bottle includ-
ing cap with 2 connec-
tors. The waste bottle
does not contain any
liquid level sensor. This
bottle is used for foamy
solutions only.
30045220 BOTTLE WASTE 4LWITH CAP
Table10: Spare Parts for the waste bottle
9.3 Tubing and Cables
No Plain Text Designa-
tion
SAP No Label Designation
1 Connection Cable to
Optibo PCB
10619415 CABLE CONNECT.FWO/MPO
RIGHT RSP 100/ 150
2 Liquid sensor cable 30013326 CABLE SENSOR LIQUID
VAC.BOTTLE TEVACS
3 Tubing 6x1 mm PTFE
(length = 12.5 m)
10760904 TUBE PTFE 6*8MM 12M TE-VACS
4 Tubing 4x1 mm PTFE
(length = 2.5m)
10760915 TUBE VACUUM PTFE 4*6MM 2.5M
Table11: Tubings, tubing connectors and cables for the Te-VacS