tecan Te-VacS - Maintenance Tasks

6 - Preventive Maintenance and Repair
Maintenance Tasks
Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0 41 / 54
6.4 Maintenance Tasks
6.4.1 Cleaning the Te-VacS
1. Clean the base plate vacuum block, the vacuum block, the spacer (if used), the
waste bottle and the tubes.
2. Clean the ventilation holes (A) and extraction holes (B) in the base plate
vacuum block and remove any obstructions.
B
A
A
B
Illustration23: Ventilation and extraction holes in the base plate vacuum block