28
Audio, Talk, Record, Snapshot
You can click these buttons to perform audio, talk, record and
snapshot functions.
Note: About recording path, click button to enter setting interface. Under Device basic
information you can set “Local Recording Path” for saving manual taken snapshots and
recordings, as seen in figure 8-8.
Figure 8-8
Multipicture change button
If you add multiple devices in chapter 8.8.1 “multi-device settings”, it will connect other
device to display pictures automatically when changing to 4, 9 split screen
. In playing video area, you can select a picture to control audio, talk,
record, snapshot, PT control and etc.
Viewing control area
You can control PT moving, picture reversal, mirroring and etc. when viewing video. See
figure 8-9. Adjusting picture parameters includes resolution, brightness, contrast, chroma
and etc. The camera supports 16 preset points. You can set a as preset point by moving the
camera via PT to the wanted place. You also can call a set preset point by selecting it. The
camera moves to the selected preset point.
Figure 8-9
To Next Page
Loading...
