3/6/2018 Proprietary and Confidential - Technicolor 103
Universal Plug and Play (UPnP) allows client devices to automatically configure the device
for various Internet applications, such as gaming and video conferencing. This protocol
messaging over the LAN can be enabled or disabled.
Click on the Application tab, and then click on UPnP tab. The page displays UPnP setup
information as shown below:
9.6.1 User provisioning of UPnP
The following parameters can be configured by the user:
2. Set the UPnP Advertisement Period - The advertisement period is how often the
device advertises (broadcasts) its UPnP information. This value can range from 1 to
1440 minutes. The default period is 30 minutes. Shorter durations ensure that control
points have current device status at the expense of additional network traffic.
3. Advertisement TTL - The time to live for the advertisement is measured in hops
(steps) for each UPnP packet sent. A hop is the number of steps allowed to
propagate for each UPnP advertisement before it disappears. The number of hops
can range from 1 to 255. The default value for the advertisement time to live is 5
4. Zero Config – The UPnP architecture supports zero configuration networking. An
UPnP compatible device from any vendor can dynamically join a network, obtain an
To Next Page
Loading...
Need help?
General
