Technicolor CGA4131 User Manual

3/6/2018 Proprietary and Confidential - Technicolor 111
• tchCmMtaCliAccessType - Controls telnet/SSH access to the CM IP Address
• tchCmMtaCliAccessUsername - Username string
• tchCmMtaCliAccessPassword - Password string
10.3 Backup & Restore
The backup feature saves the current CGA4131 configuration to a local PC. These settings
can be restored later if a configuration needs to be restored, or to recover from changes that
have had an undesirable effect.
To back up the current configuration, click Backup and follow the prompts. To restore a
previous configuration, click Browse and use the navigation window to locate the file. (The
default file name is filename_YY_MM_DD_HOUR_MINUTES.gwc).Note that this file is
encrypted. When the file has been located, click Restore to restore the settings. When the
settings are restored, the device will reboot to the restored settings.
10.3.1 User provisioning for Backup & Restore
Administration Tab/ Backup & Restore
Click on the Administration tab and then the Backup & Restore tab. This page displays
Backup & Restore setup information.
The user can back up the configuration data to a specific file or restore the already backed
up data from a file.
Figure 10.5

Technicolor CGA4131 Specifications

General

Brand	Technicolor
Model	CGA4131
Category	Gateway
Language	English