Technicolor CGA4131 - SNMP Provisioning for Firewall

3/6/2018 Proprietary and Confidential - Technicolor 82
Figure 8.4
Similar configurations can be done for the IPv6 firewalls in the system. By default, the firewall
configuration is set to “Off”.
8.1.2 SNMP provisioning for Firewall
SNMP provisioning is done by the following MIBs for Firewall Basic settings
S. No.
MIBs
Description
1
rdkbRgFirewallProtection
Controls the firewall. This parameter is stored in non-
vol and is enabled after factory reset. Options are
Disable / Low, Medium, High and Custom.