36
To make network-related settings
You can set specific IP address, subnet mask,
default gateway, primary DNS, etc. (If your network
requires specific settings, disable DHCP.)
• Do not play back music while changing these
settings.
1 Press [NWP].
2 Press [SETUP].
3 Press [
], [ ] repeatedly to select
“Network” and then press [OK].
4 Select and input the details.
5 Press [OK] to apply the settings.
6 Press [RETURN] to exit the settings.
7 Press [NWP
] to switch the unit to
standby.
• Wait until “Please Wait” disappears.
8 Perform the network setting. (⇒ 28)
To Next Page
Loading...
