45
Operations
Using USB device
(Continued)
You can connect a USB device to the unit
and play back music stored on the USB
device.
• Refer to “USB” (⇒ 99) for information
about the USB device this unit can play
back.
USB device
1 Connect a USB device to the USB-A
terminal (USB Front) on the front of this
unit.
2 Press [NWP].
3 Press [>INPUT<] repeatedly to select
“USB Front”.
• You can also select the input source by turning
the multi control knob after pressing [INPUT] on
the unit.
• The folder/content selection screen will be
displayed.
4 Press [ ], [ ] to select an item and then
press [OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous folder.
To Next Page
Loading...
