48
Operations
Using digital audio output
device
(Continued)
You can connect a digital audio output
device with coaxial digital cable (not
supplied) or optical digital audio cable (not
supplied) to this unit and play back music.
Digital audio output device
Optical digital
audio cable
(not supplied)
Coaxial digital
cable
(not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit and a digital audio
output device.
3 Connect the AC mains lead to this unit.
(⇒ 27)
4 Press [NWP
] to turn this unit on.
5 Press [>INPUT<] repeatedly to select
“COAX” or “OPT”.
• You can also select the input source by turning
the multi control knob after pressing [INPUT] on
the unit.
6 Start playback on the connected device.
To Next Page
Loading...
