TechniSat Digit ISIO S2 User Manual

16
> To download the available current channel list, use the up/down arrow keys to
highlight the ISIPRO - service list update line and start the process by pressing
the OK button.
The current channel list will now be downloaded via satellite. Please observe
subsequent screen displays and notes under section 17.4.
> If you want to run a channel search via satellite instead of updating the channel list,
or if the DVB-S reception signal has not been configured, use the up/down arrow
keys to highlight the All channels or All unencrypted channels field, then start
the channel search process by pressing the OK button.
In this search, all selected satellites in the antenna configuration are automatically
scanned for channels. This procedure may take several minutes. Please note all
messages displayed on screen.
If the channel search/channel list update has been skipped, the default channel list will
be loaded.
Regional programmes
Some broadcasters transmit channels with varying regional content. On this page you can
define your preferences for these regional programmes. The selected regional programme is
automatically set by switching to the relevant programme provider.
> Use the arrow keys to highlight the programme provider whose preferred regional
programming you want to specify.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD