TechniSat Digit ISIO S2 User Manual

17
> Press the OK button to open a window with the regional programming available for
this programme provider.
> Use the up/down arrow buttons to select your preferred regional programming.
> Press the OK button to close the window again.
> To accept the selected regional programming, use the arrow keys to highlight the
Accept field.
> Confirming with the OK button takes you to the next step of the installation.
If you subsequently select another regional programme for a programme provider
according to section 8.4.4, this will be saved in the same way for this programme
provider.
ISIO Internet list updates
The receiver has a pre-programmed ISIO list with web links. This can be updated
automatically.
> If you do not want to wait for the current ISIO Internet list to be downloaded, you can
skip this process by pressing the Info button.
watchmi
In this step you can enable the watchmi service and select the channels you want to add to
the TV list and the EPG overview.
The watchmi service is an online service operated by Axel Springer Digital TV Guide
GmbH.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD