30
31
EN
FR
IT
NL
NW
DK
PL
CZ
SK
5.3.2 Connecting to the mains
> To do this, attach the supplied USB cable to the mains adapter and insert it into
the mini-USB port marked DC-IN on the side of the DIGITRADIO 1. Then attach
the mains adapter to the mains.
Ensure that the operating voltage of the mains adapter corresponds with the
local mains voltage before you insert it into the wall socket.
Once a mains connection has been established for the first time, “TechniSat
Digitalradio” appears in the display. You can then select the operating
language. To do so, use the t or u button to select one of the available
languages and confirm the selection by pressing the OK button. The DAB+
station scan will then be carried out for the first time. Please also note the
information in Section 5.4.1.
5.3.3 Aligning the telescopic aerial
The number and quality of broadcast stations depends on the reception conditions
at the location of the device. Excellent reception can be achieved with the telescopic
aerial.
> Align the telescopic aerial and extend it to its full length.
Precise alignment of the telescopic aerial is important, especially in the fringe
areas of DAB+ reception. The position of the nearest radio mast can be quickly
found on the Internet by going to www.digitalradio.de, for example.
Start the first scan at a window facing the radio mast.
DAB+ reception may be restricted in bad weather.
Do not touch the telescopic aerial when receiving a station. This can impede
reception and lead to sound dropouts.
BDA DigitRadio 1.indd 30-31 16/04/2018 16:41
To Next Page
Loading...
Need help?
General
Weight and Dimensions
