Techno CNC Systems 60120 - Page 84

84
Call: 1-631-648-7481 or Visit: support.technocnc.com
Titan Series WinCNC Manual
WinCNC
Author: Mike Ruff
Becker Pumps Corp.
Greasing TLF 2.200-2.360
-Tools required-
X1 – 7433050000
(50 gram grease gun)
Author: Mike Ruff
Becker Pumps Corp.
Greasing
instructions
The greasing instructions can be found
on step “P.” in the operation manual sent
with each pump.
Or they can be found at
www.Beckerpumps.com
Bearings are to be grease every 3000 –
4000 hours