3. MACHINE HANDLING AND INSTALLATION
3.1 InstAllAtIon specIfIcAtIons And reQuIrements
Refer to the MACHINE INSTALLATION MANUAL.
In order to install the equipment correctly, you need to make sure that:
1. The equipment is installed on a at surface, with no vibrations and sucient load bearing
capacity to allow for the weight of the user too.
2. The environment is not dusty or sandy.
3. The requirements regarding temperature and humidity levels are complied with. See para-
graph: “2.3 Environmental characteristics” to page 6
3.2 lIftIng And hAndlIng
Due to its weight, dismantle and reassemble the equipment in order to move it to the desired loca-
tion.
Refer to the MACHINE INSTALLATION MANUAL.
PLURIMA - the smart multistation:
Technical Service Guide - Vers. 2.1
Page 21
To Next Page
Loading...
