Technogym Plurima MF30 - Leg Press

5.8
leg press
Operation description: Action:
Dismantling the platform
leverages
LIFT THE FIRST PLATE OF THE WEIGHT STACK:
1. Unscrew the screws of the platforms (using a 5 mm Allen
wrench).
2. Using a rubber hammer slip o the pin and the platform.
3. At the boom of the lever, remove the stoppers (using a at
head screwdriver) and take out the screws (using a 5 mm Allen
wrench).
4. Remove the lever.
Operation description: Action:
Dismantling the selection
pin
BRING THE SEAT ALL THE WAY BACK
1. Unscrew the front screw of the selection plate (using a 4 mm
Allen wrench.)
2. Take the pin out of the selection plate in a forwards direction.
3. Remove the lever screw (using a 4 mm Allen wrench), blocking
the pin on the opposite side (using a Phillips screwdriver.)
Operation description: Action:
Dismantling the gas
spring
BRING THE SEAT TO THE UNLOADING POSITION (ALL THE
WAY FORWARD):
1. Unscrew the xing bolts and screws (using a 13 mm spanner
and a 4 mm Allen wrench) and remove the gas spring.
PLURIMA - the smart multistation:
Technical Service Guide - Vers. 2.1
Page 31