Technogym Skillmill - Page 56

6.3.7 CONFIGURING THE SUMMARY
6.3.7.1 SETTING THE MINIMUM SPEED AND TIME TO INTERRUPT THE SUMMARY
Command Notes
Command @SNEWEXCOND speed time#
Sets the minimum speed and the time for which
it must be maintained in order to interrupt the
summary by walking on the belt.
Table 53
The speed parameter indicates the speed in km/h. The time parameter indicates the time in seconds.
6.3.7.2 VISUALISING THE MINIMUM SPEED AND TIME TO INTERRUPT THE SUMMARY
Command Notes
Command @RNEWEXCOND#
Displays the minimum speed and the time it
must be maintained in order to interrupt the
summary by walking on the belt.
Table 54
6.3.8 CONFIGURING THE DATE AND TIME
6.3.8.1 INITIALISING THE RTC
Command Notes
Command @RTCINIT# Initialises the RTC (Real Time Clock).
Table 55
Skillmill
Technical Service Guide - Rev. 3.5
Page 56
email: support@technogym.com