Technogym Skillmill - Page 68

6.6.3 THE DISPLAY ONLY TURNS ON AT A HIGH SPEED (CONSOLE VERSION)
First, always upgrade the SW to the latest released version.
OK. Problem solved.
Yes
OK. Problem solved.
Yes
No
Replace the Low Kit (*)
No
The display only turns
on at a high speed
Check the posi�on of
the RPM sensor
[1].
Is the problem solved?
Replace the RPM sensor(*) and the
connec�on cable. Is the problem solved?
Figure 36
[1]: For the details, see “3.1.5.1 mechanical regulations”.
(*): For the details, see”6.1 Procedure for replacing components”.
Skillmill
Technical Service Guide - Rev. 3.5
Page 68
email: support@technogym.com