To Next PageTo Next PageWhat to do if Technomark M4 inline Label Maker displays error code 10?
If the Technomark Label Maker displays error code 10, which indicates a weak current, check the condition of the striker unit cable and restart the controller. Also, inspect the striker unit connector, ensuring it's properly connected, and then restart the controller.
What to do if Technomark M4 inline displays error code 9?
If the Technomark Label Maker displays error code 9, it signifies an open circuit. You should check the condition of the striker unit cable, ensuring it is not cut or damaged, and then restart the controller. Also, inspect the striker unit connector to confirm it is undamaged and properly connected before restarting the controller. Additionally, verify the condition of the marking head cable and restart the controller.
What to do if Technomark M4 inline Label Maker displays error code 13?
If the Technomark Label Maker shows error code 13, it means there's no marking head detected. Ensure the head is correctly connected and the connector is locked, then restart the controller. Inspect the cable's condition. Also, check for any obstructions blocking the striker unit's path and restart the controller. If needed, power off the device and manually check if the machine can move to its original position freely.
Overview of the M4 inline front panel buttons, screen, and ports.
Explains different graphic view modes like Normal, 30x30 zoom, Total, and Text.
Details on toolbar buttons for inserting marking/mechanical functions, file configuration, and special characters.
Explanation of columns used in the marking file data table, including text, position, and height.
Description of text formatting options such as compression, character spacing, and italic inclination.
Details on how marking depth is influenced by force and distance, and the IDI function.
Overview of available dot matrix types and their impact on the duty cycle.
Guide to adding various marking functions like serial numbers, variables, timestamps, logos, and codes.
Instructions for configuring serial numbers, including name, value, step, frequency, and zero marking.
Steps for creating and using variables, including types like VSHARED and bar code variables.
How to configure timestamps using date, hour, and team name codes.
Procedure for inserting logos created with TechnoLOG software into marking files.
Configuration details for adding Datamatrix and QR codes, including text, speed, and format.
Options for adding mechanical functions like pause, crossing point, inputs, outputs, and ZInline moves.
How to set a pause status within a marking line.
Procedure to force the marking head to pass through a defined point.
Configuration for waiting a specific state of an input, with delay and state options.
How to change an output state using a file line, including number, delay, and state.
Instructions for ZInline moves: to Home, to Mark, and relative moves.
Configuration of general marking parameters including speed, IDI, mirroring, and stylus height.
Information on adding special characters, currently unavailable.
Procedures for moving the marking head, testing line/file envelopes, and performing marking tests.
Instructions for saving the current file and opening existing marking files.
Steps for creating new files and importing marking files from a USB drive.
Procedure for exporting marking files and logos from the controller to a USB drive.
Display of controller information including file system, statistics, software release, and hardware details.
Overview of maintenance tasks and requirements, including lubrication and axis revisions.
Enabling IDI track function and controlling mechanical surveillance for stylus, part presence, and lubrication.
Using auto diagnosis for mechanical checks and debug mode for system monitoring.
Viewing the error log and controlling output states, including ZInline axis moves.
Step-by-step procedure for calibrating the IDI function for accurate marking.
Setting general parameters for the control box, including language, units, autosave, and screen brightness.
Configuring the controller's date, time, time zone, and team information.
Defining custom formats for timestamps using day, month, year, and team data.
Configuring mechanical settings such as window size, bidirectionnal mode, and optimized speed.
Detailed configuration of the 16-way input/output ports and their associated functions.
Explanation of specific input functions like File Open and output functions like Ready, Marking, and Fault.
Configuring serial communication parameters and TCP/IP settings for network connectivity.
Managing user accounts, privileges, and password settings for machine access.
Locking machine functionalities and changing the supervisor password.
Instructions for entering license numbers to activate software features.
Configuring origin set modes for startup and marking, and defining parking points.
General| Brand | Technomark |
|---|---|
| Model | M4 inline |
| Category | Label Maker |
| Language | English |
