The above [NTP function] change will be available only when system connected to internet. And
When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start
5.2.7.2Users
Click [Main MenuSystem
The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User
Edit] interface shown as Picture 5
Select one <common user> and click
54. [Admin] is authorized to set common user’s authority.
select the option and the user is allowed to view all the live images for all the channels.
select the option and the user is allowed to playback the record you selected.
Picture 5-52
Picture 5-54
The above [NTP function] change will be available only when system connected to internet. And
When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start
users] option and then enter into the interface shown as Picture 5
The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User
53. And input user name and password.
Select one <common user> and click
<Apply>,
and
then
enter
into
<Auth
ority set> interface shown as 54. [Admin] is authorized to set common user’s authority.
select the option and the user is allowed to view all the live images for all the channels.
select the option and the user is allowed to playback the record you selected.
allow you check all the system logs.
allow you set all the parameters.
allow you update version, recover
factory value, device reboot and shut down.
allow you manage and control the
allow you sequence live screens for
all the channels.
Manual record:
allow you manually start/stop
select the option, the user is allowed to
backup the record of all the channels.
The above [NTP function] change will be available only when system connected to internet. And
When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start
users] option and then enter into the interface shown as Picture 5
The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User
<Apply>, and then enter into <Authority set> interface shown as
select the option and the user is allowed to view all the live images for all the channels.
select the option and the user is allowed to playback the record you selected.
allow you check all the system logs.
allow you set all the parameters.
allow you update version, recover
factory value, device reboot and shut down.
allow you manage and control the
allow you sequence live screens for
allow you manually start/stop
select the option, the user is allowed to
backup the record of all the channels.
To Next Page
Loading...
