Tecnar Rotoweld 3.0 - Figure 40 Wire Speed Parameters; Figure 41 Wire Speed; Figure 42 Travel Speed Parameters; Figure 43 Travel Speed

This document contains information considered proprietary and confidential to Tecnar Automation Ltd
40101-00020-00– Rev 1.2
Revision date: 2017-07-31
Page 39 of 48
!
6.13.2 WIRE SPEED:
Move the joystick on the WIRE SPEED parameters (figure 40).
!
FIGURE 40 WIRE SPEED PARAMETERS
By pressing the SELECTION/ENTER knob you will be able to change the
desired value by moving the joystick up or down (figure 41).
!
FIGURE 41 WIRE SPEED
Once finished, you can exit the WIRE SPEED parameters by pressing the
SELECTION/ENTER knob.
6.13.3 TRAVEL SPEED:
Move the joystick on the TRAVEL SPEED parameters (figure 42).
!
FIGURE 42 TRAVEL SPEED PARAMETERS
By pressing the SELECTION/ENTER knob you will be able to change the
desired value by moving the joystick up or down (figure 43).
!
FIGURE 43 TRAVEL SPEED
Once finished, you can exit the TRAVEL SPEED parameters by pressing the
SELECTION/ENTER knob.
!