Tecnar Rotoweld 3.0 - Figure 57 Power Setting; Figure 58 Power Setting; Figure 59 Wire Speed; Figure 60 Wire Speed

This document contains information considered proprietary and confidential to Tecnar Automation Ltd
40101-00020-00– Rev 1.2
Revision date: 2017-07-31
Page 44 of 48
!
6.18.2 POWER SETTING:
Move the joystick on the POWER SETTING parameters (figure 62).
FIGURE 57 POWER SETTING
By pressing the SELECTION/ENTER knob you will be able to change the
desired value by moving the joystick up or down (figure 63).
FIGURE 58 POWER SETTING
Once finished, you can exit the POWER SETTING parameters by pressing
the SELECTION/ENTER knob.
6.18.3 WIRE SPEED:
Move the joystick on the WIRE SPEED parameters (figure 64).
FIGURE 59 WIRE SPEED
By pressing the SELECTION/ENTER knob you will be able to change the
desired value by moving the joystick up or down (figure 65).
FIGURE 60 WIRE SPEED
Once finished, you can exit the WIRE SPEED parameters by pressing the
SELECTION/ENTER knob.