Chapter 4 Software Index
4-30
9: Base Block Stop Mode
10: Motor Overload Protection
11: Drive Overload Protection
12: Over-torque Threshold Level
13: PID Feedback Signal Loss
01-11: Frequency Reached Output Setting =0.00 ~ 400.00Hz
01-12: Frequency Detection Range =0.00 ~ 30.00Hz
01-09/10= 2:
The preset frequency is reached ( ± 01-12)
01-09/10= 3:
Arbitrary frequency consistency Fout = 01-11 ± 01-12
Figure 4-14 Frequency reached example
Figure 4-15 Frequency within specified range example
To Next Page
Loading...
