Chapter 7 FBD Block Description 119
Now Press:
← →
1．① display the previous / next Function Block Parameter
2．④，⑤ move the cursor
↑ ↓
1．move the cursor from to
2．move the cursor from ， to
SEL then
↑ ↓
Timer: 1. f modify the setting value (0000~9999)
2. g modify the time unit (0.01s⇔0.1s⇔1s⇔1min)
Counter: Modify preset value.
SEL
numerical value →A1→T1→C1→ numerical value
OK Save the modified data after press ‘SEL’
ESC 1. Cancel the modified data after press ‘SEL’
2. Back to Main Menu.
FDB PARAMETER modifying step:
Take timer (mode 1) as an example: Analog input A4 is set as preset value. Time
unit is s.
Step 1
Press ‘↑ ↓’
B 0
1:T2
Move the cursor to
default place
T=
00. 0 0 S
Step 2
Press ‘SEL’ twice B 0
1:T2
To Next Page
