Chapter 5 Operation Flow 28
ta: Input OFF -> ON response time
tb: one scan time
tc: Output OFF-> ON response time
5-2 Operation dealing in power loss
Under RUN mode, the present data of counter and the state of the M coil will
be memorized as power off.
5-3 RUN－STOP－RUN operation
RUN－STOP, present output will be cut and the present value of function block
and state of the coils will be cleared.
However, the present data will not be cleared as C Keep is selected and counter
mode is set to 3, 4, 6.
To Next Page
Loading...
