TECO SG2 - SHIFT Setting Screen; PARAMETER of Main Menu

Chapter 7 FBD Block Description 118
SEL 後
↑ ↓ ← →
1.
d modify the setting stage (1~8)
2.e modify the pulse width(00000~32768)
3. fmodify the period (00001~32768)
OK Save the modified content after press ‘SEL’
ESC 1.Cancel the modified content after press ‘SEL’
2. Back to edit screen(1) for coil
(7) SHIFT setting screen
Now press
↑ ↓
Move the cursor
d⇔e
SEL Begin to edit
SEL , then
↑ ↓
1．
d modify the output type Q⇔Y⇔Q
2．
e modify the move coil number (1~8)
OK Save the modified content after press ‘SEL’
ESC 1.Cancel the modified content after press ‘SEL’
2. Back to edit screen (1) for coil
◎ PARAMETER of Main Menu (All the parameter of the used function block in editing
FBD program with SG2 Client software can be queried and modified.)