TECO SG2 - Chapter 12 Technical Specification; General Specification

Chapter 12 Technical Specification 128
Chapter 12 Technical Specification
12-1 General Specification
Item Specification
Method of input program By means of Ladder / Function Block
Operation temperature
-20-55℃
Storage temperature
-40 - 70℃
Operation humidity
20-90% RH, no frost
Operation
Environment
Environmental gas
No corrosive gas exists
Vibration resistance
IEC60068-2-6 standard
0.075mm amplitude/1.0g acceleration
Mail Structure
Impact resistance
IEC60068-2-27 standard
15g peak, 11ms duration
ESD Contact ±4KV, air discharge ±8KV
EFT Power DC/AC: ±2KV DC: ±1KV
CS 0.15~80MHz 10V/m
RS 80~1000MHz 10V/m
Noise proofing
EMI EN55011 class B
Enclosure Protection IP20
Fixing method Direct or Din rail (35mm) installation
Installation
Direction Please refer to Page 4-3
Size of cable
AWG 12ø3.5mm
2
Dimension
72×90×59.6 mm(W×L×H) Din rail
72×106×59.6 mm(W×L×H) Direct installation