Chapter 9 Spare Program 123
Chapter 9 Spare Program
9-1 Spare Program Cartridge (PM05)
◎. The installation method for PM05 (optional) is as follow
Step1: Confirm cutting off the power supply.
Step 2：Remove the cover of SG2 with the screwdriver, as follow :
Step 3：Plug PM05 to the slot, as follow :
Step 4: Put on the power supply
Step 5：In the operation function list, click WRITE to enter the confirmation interface
and click YES to download the spare program. （Download the program from SG2
to PM05）
Note：If it is desired to recover the spare program, click READ on the operation
function list to enter the confirmation interface and click YES to upload the spare
program. (Upload the program from PM05 to SG2).
Step 6: Cut off the power supply.
Step 7: Prize up PM05 referring to step 2 and cover the protective cover.
To Next Page
Loading...
