TECO SG2 - Hmi

6-39
To modify the preset value 000010 of the counter mode 7 as present value of T2 in
HMI.
Step1：In HMI screen, to press‘SEL’, the cursor blinks in the following location.
T 1 = 0 0 . 0 0Sec
T 1 = 0 0 . 0 5Sec
C 1 ＝ 0 0 00 10
0 0 0 0 0 0
Step2：Press ‘DOWN’ and the cursor skips to C1 preset value position.
T 1 = 0 0 . 0 0Sec
T 1 = 0 0 . 0 5Sec
C 1 ＝ 0 0 00 10
0 0 0 0 0 0
Step3：Press ‘SEL’ for three times, the preset value changes from 000000, A1, T1 in turn.
T 1 = 0 0 . 0 0Sec
T 1 = 0 0 . 0 5Sec
C 1 ＝ T 1
0 0 0 0 0 0