TECO SG2 - Timer; Timer Mode

6-11
Note：
As show in the diagram, the output will be delayed for one interval.
6-3-2 Timer
Note：
※ The setting value of the timer could be constant, or the present value of the timer,
counter or analog input of A1~A8.
※ For I1~gF, input terminal:I1~IC(I1~I12),output terminal: Q1~Q8,expansion input
terminal:X1~XC(X1~X12),expansion output terminal: Y1~YF(Y1~Y12),
Counter :C1~CF(C1~C15),Timer :T1~TF(T1~T15) , RTC Comparator:
R1~RF(R1~R15) , analog Comparator: G1~GF(G1~G15),Auxiliary terminal: M1~MF
Symbol
Description
c
Timer Mode (1-7)
d
Timer Unit：1：0.00~99.99s
2：0.0~999.9s
3：0~9999s
4：0~9999m
e
Use I1~gF to reset the timer value.
ON ：timer value is reset to Zero and h OFF
OFF ：timer continues to timing
f
Timer present value
g
Timer target value
h
Code of timer (T1~TF total: 15Group)