TECO SG2 - Operation Method; Original Screen

6-44
Sample 2:I/O LINK mode 2
Set
①
= 2，
②
= 5, set
③
as start from I3, set
④
as start from W17, when enabling the
I/O link, the state ‘ON/OFF’ of I3~I7 is controlled by the state of memory list position
W17~W21
-
④
, which is irrelative to the actual state of input terminal.
6-4 Operation Method
6-4-1 Original Screen
◎ The Original Screen as Power is ON.
(1) Language Setting Screen:
> ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO