6-43
list shows. The receiving mode can be selected: W1,W9,W17,W25,W33,W41,W49 and W57.
Sample 1 I/O LINK Mode 1
Set
①
= 1，
②
= 5, set
③
as start from I3, the state of actual sending terminal I3~I7 is
sent to memory list; the controller ID = 3, the state of corresponding memory list position
W17~W24
-
④
and relationship of sending terminal is as below:
ID Memory List Location Sending memory Receiving memory
0 W1~W8 W1~W8 W9~W64
1
W9~W16 W9~W16 W1~W8, W17~W64
2
W17~W24 W17~W24 W1~W16, W25~W64
3
W25~W32 W25~W32 W1~W24, W33~W64
4
W33~W40 W33~W40 W1~W32, W41~W64
5
W41~W48 W41~W48 W1~W40, W49~W64
6
W49~W56 W49~W56 W1~W48, W57~W64
7 W57~W64 W57~W64 W1~W56
To Next Page
Loading...
