TECO SG2 - Analog Comparator

6-25
2000/01/01 … 2003/05/23 … … 2004/12/22 … 2099/12/30
Time 0:00 0:00 0:00 0:00
ENABLE
Rn Output：
6-3-4 Analog Comparator
※The ON or Off of analog output terminals (G1~GF) is determined by the comparison of the
analog inputs of Ax and Ay.
※The set value of analog comparator can be modified via communication module as MODBUS,
Symbol
Description
c
Analog Comparison Mode(1~5)
d
A
X analog input (A1~A8), or the present
value of the timer, counter.
e
A
Y analog input (A1~A8), or the present
value of the timer, counter.
f
A
X analog input value(0.00~9.99)
g
A
Y analog input value (0.00~9.99)
⑥
Set reference comparative value: could be
constant, or the present value of the timer,
counter and analog input.
⑦
Output terminal(G1~GF)