6-26
PROFIBUS, DEVICENET, TCP/IP.
When the relay of analog comparator is ON, there are 5 operation modes described below:
(1) Analog Comparator mode 1 ( A
Y - ⑥ ≤ AX≤ AY +⑥， ⑦ ON)
(2) Analog Comparator mode 2 (A
X ≤ AY， ⑦ ON)
(3) Analog Comparator mode 3 (A
X ≥ AY， ⑦ ON)
(4) Analog Comparator mode 4 (
⑥ ≥ AX， ⑦ ON)
(5) Analog Comparator mode 5 (
⑥ ≤ AX， ⑦ ON)
6-3-5 HMI File
This function block ,12×4 can display the information as word information, present value and
target value counter, timer, RTC and Analog comparator. Under running mode, to modify the
target value of timer, counter and analog comparator via HMI is available. HMI can display the
status of input terminal (I, X) and Auxiliary terminal M, N.
(1) Display mode could be changed via the keys, first page displays =1, first page doesn’t
display = 2.
Symbol
Description
c
Display mode（1~2）
g
HMI character output terminal (H1~H8)
To Next Page
Loading...
