6-9
be memorized when Run/Stop switching.
◎High Speed Counter (Only Provide for DC Power Supply)
DC power supply type has two 1 KHz High speed input terminals, I1 and I2. Two groups of
high-speed counting function is available with these two counters.
(1) Counter Mode 7
Symbol
Description
c
Counting mode(7)—high speed counting
d
High speed counting input terminal: only I1, I2
available.
e
Use I1~gF to reset counting value.
ON: counter is reset to zero and hOFF
OFF: counter continues to count.
f
Counter present value: 0~999999
g
Counter target value: 0~999999
h
Code of Counter (C1~CF Total :2/15Group, only 2
Groups is available for mode 7, but the counter
code is not limited )
To Next Page
Loading...
