6-27
＊The displayed information can be only input by means of Client Software. Under
running mode, to modify the preset value of the timer, counter, RTC and analog comparator
is available via HMI of the controlled equipments.
How to use HMI function in SG2 client software will be described in detail, here.
◎Under FBD mode:
1. Open the text editor. All the components available to text are listed in Function Block Table of
the text editor.
2. To select the component in Function Block Table that lists all the editable parameter of the
certain component.
3. To select the parameter in the list, the information with corresponding format will be input the
LCD of emulator.
4. To press the 'OK' button after editing text finished, the data is all saved in the Hxx component
function block.
For example:
To Next Page
Loading...
