6-28
Description:
(1) To select text Hxx (H01-H0F). If there is no HMI (Text )Block in program ,'NO Hxx' will be
displayed here.
(2) Text display on LCD;
(3) When the Display is enabled, the user can press the SEL button for 3 seconds to show the HMI (Text)
Messages
(4) To select the 'Unit', the input parameter includes Unit (with Unit display). Or the parameter displayed
has no Unit (without Unit display).
Example :
1. To select the 'Unit (with Unit display)
Under this condition, both preset value and current value can be displayed at same time.
A, Timer: operation mode 1(output delay). Text display as follow.
To Next Page
Loading...
