6-42
ON OFF OFF OFF 1 Set stage 1
ON OFF OFF ON 2 Set stage 2
ON OFF ON OFF 3 Set stage 3
ON OFF ON ON 4 Set stage 4
ON ON OFF OFF 5 Set stage 5
ON ON OFF ON 6 Set stage 6
ON ON ON OFF 7 Set stage 7
ON ON ON ON 8 Set stage 8
Note：X indicated ON/OFF input terminal is idle.
6-3-7 I/O LINK Function（only provided for 20Vx-X Type）
Note:
※
①
Only one sending mode can be set among L1~L8, others are for receiving mode.
※
②
Selecting input points: I1~IC(I1~I12), output points: Q1~Q8, expansive input points:
X1~XC(X1~X12), expansive output points: Y1~YF(Y1~Y12), auxiliary points: M1~MF
（M1~M15）.
※
③
Receiving mode is determined by the controller ID which can not be changed, as the left
Symbol
Description
c
Mode setting (1,2) 1:sending 2:receiving
d
Set the send/receive points(1~8)
e
Set the send/receive points
f
Send/receive memory list location
g
I/O link output terminal (L1~L8)
To Next Page
Loading...
