4-20
Y1 Y2
Y3 Y4
Output 4 x Relay / 8A
SG2-8ER-A
4) Output (Transistor):
++
-
SG2-8ET-D
+
OUTPUT 4 x TR/0.5A
-
+
-
-
Y1 Y2
Y3 Y4
- 1A quick-blowing fuse, circuit-breaker or circuit protector
- Surge absorber(36V DC)
- Surge absorber(400V AC)
- Fuse, circuit-breaker or circuit protector
- Inductive load
Note: When Relay output connects with AC inductance load, please parallel
connect with a surge absorber, while connects with DC inductance load, parallel
connect with a rectifying diode with the negative withstand voltage over 5~10 times
of the load voltage and positive current over the current of the product. Please select
DC power supply for Transistor output model and parallel connect with a rectifying
diode for inductance load.
To Next Page
Loading...
