Chapter 3: Menu reference > Option 13 Start Auto Access Test
Challenger10 Administrators Manual 29
Note: If your Challenger system is programmed as a financial institution system,
and is programmed to automatically go into access test mode when disarming
area 1 (which contains camera film count inputs), then you will see the current
film counts for cameras 1 to 4. The LCD screen will resemble the example in
“Option 8 Film Counters” on page 25 until you press [ENTER] or the display
times out.
If there are any tests not completed, you can again select Start Auto Access Test
to finish the testing.
To Next Page
Loading...
