TECOM Challenger10 - Page 39

Chapter 3: Menu reference > Option 14 Program Users
Challenger10 Administrators Manual 31
Display User
User No:
Enter the user number and then press [ENTER] to display the user’s alarm
group.
Note: In the Display user option, you may see prompts to use the [MENU*] key
to change a setting. The [MENU*] key is not applicable to this option.
*-View, Alm Grp:12,Foreman
Press ENTER
Press [ENTER] to display the user’s door group.
Door Group: 2
Press ENTER
Press [ENTER] to display the user’s floor group.
Floor Group: 1
Press ENTER
Press [ENTER] to display the first of the user flags (if the system is programmed
to display user flags).
NO - Dual Custody
*-Change 0-Skip
Press [ENTER] to display subsequent user flags. Alternatively, press [0] to skip
the subsequent user flags.
The user flags displayed in sequence are:
• dual custody
• guard
• visitor
• trace user
• card only
• privileged
• long access
Press [ENTER] to display the user’s name (if the system is programmed to allow
user name files), for user numbers in the range 1 to 2000.