Tecsun PL-680 - Trouble Shooting

TECSUN RADIOS AUSTRALIA
www.tecsunradios.com.au
22 PL-680
TROUBLE SHOOTING
QUESTIONS ANSWERS SOLUTIONS
Radio turns off while
listening.
- Batteries have no
power
- Sleep timer is
activated.
- Replace or charge all
batteries.
-Turn the radio on again.
During ATS, some
stations cannot be
stored.
Some stored stations
have noise.
- Frequency of stations
is too weak.
- There is interference
near by your area.
- Search the station
manually.
- Contract the antenna or
move to other location
and try again.
Only few FM stations
can be received.
- FM frequency may
have been set to
76 - 90MHz
accidentally.
- Turn off the radio, press
& hold the [FM SET]
button to select the
accurate FM frequency
range.
Poor AM reception in
USA.
- USA uses 10kHz AM
tuning steps, the
device may still be set
to 9kHz.
- Turn off the radio
press the [9/10kHz]
button to select
accurate tuning step.
The sound of SW
SSB broadcasting is
too low.
The default bandwidth
is Narrow band.
Press the [AM BW]
button to select the Wide
band.
Cannot turn on the
radio.
- Batteries have no
power
- Batteries are installed
incorrectly.
- Key lock function is
activated.
- Replace all batteries
new ones.with
- Take note of the correct
polarity direction, then
reinstall the batteries.
- Press the [ ] button
to deactivated it.