PIN CODE
The PIN CODE is a five-digit user-programmable code to confirm the user's intention to change device programming or
network settings. It represents the programming key reserved for the system manager: it limits any risks of unauthorised
changes or programming errors.
Without the PIN CODE, or with the incorrect PIN, programming of the device cannot be performed remotely.
How to change the PIN CODE:
Turn off the device and turn it on again by keeping the access point button on the back pressed for approximately 2
seconds.
Connect to the device and enter the IP address on the browser screen http:// XXX. XXX.XX.XXX /setpin.html .
Example:
Press ENTER and the SET PIN CODE screen will open.
Type the new desired pin code in the appropriate box, maximum 5 numbers (SHOW to display the PIN CODE).
Press SAVE to save the pin. A POP UP window will confirm the correct saving.
PIN CODE default setting: 00000
Press BACK to main page to return to the main screen
TREND CHART NOTES
When the graphs page is opened, the last seven days recorded are displayed by default; if seven days are not available in
the memory, all the available data are displayed.
The time range allows the user to set the graphic display period. The available selections are: last 24 hours, last 7 days and
last 30 days.
CSV FILE EXPORT NOTES
After exporting the CSV file for EVENT LOG, all the recorded events are exported, up to 10,000 events. Timing recording
with UTC date and time (coordinated universal time).
After exporting the CSV file TEMPERATURE VALUES, it will be possible to select the year to be exported. The data
contained available are the last 10 years recorded. The data export will be divided into years starting from activation of the
device; if there is less than one year in the memory, all the available data are exported. Timing recording with UTC date and
time (coordinated universal time).
To Next Page
Loading...
