Tefcold BLC3 - TROUBLE SHOOTING

8
5.TROUBLE SHOOTING
The information shown below aims to help with the identification and correction of any anomalies and
malfunctions which could occur during use. Some of these problems can be resolved by the user. For the
others, precise skill is required and they must therefore only be carried out by qualified staff.
Problem
Causes Solutions
The refrigerator unit does not
start
No voltage
Check the power supply cable
Check fuses
Check the correct connection of
the appliance
Other causes
If the problem persists,
contact the after-sales centre
The refrigerator unit functions
continuously, cooling
insufficiently
Room too hot Air the environment
Dirty condenser Clean the condenser
Insufficient door sealing Check the gaskets
Insufficient quantity of
refrigerant gas
Contact the after-sales
centre
Condenser fan at a standstill
Contact the after-sales
centre
Evaporator fan standstill
Contact the after-sales
centre
The refrigerator unit does not
stop
Probe faulty
Contact the after-sales
centre
Circuit board fault
Contact the after-sales
centre
Presence of ice inside the
evaporator
Carry out a defrosting cycle
possibly with the door open
If the problem persists,
contact the after-sales centre
Appliance noise Persistent vibrations
Check there is no contact
between the appliance and
other objects inside or outside