Tekmar 527 - Adjust Menu

17 of 28 © 2009 D 527 - 06/09
Display Range Description
40 to 85°F
(4.5 to 29.5°C)
Default = 70°F
(21.0°C)
SET ROOM HEAT
Set the room heating temperature while in the event.
40 to 85°F
(4.5 to 29.5°C)
Default = 65°F
(18.5°C)
SET ROOM HEAT
Set the room heating temperature while in the event.
40 to 85°F
(4.5 to 29.5°C)
Default = 62°F
(16.5°C)
SET ROOM HEAT AWAY
Set the room heating temperature while in the Away scene.
40 to 85°F
(4.5 to 29.5°C)
Default = 78°F
(25.5°C)
SET ROOM COOL
Set the room cooling temperature while in the event.
40 to 85°F
(4.5 to 29.5°C)
Default = 85°F
(29.5°C)
SET ROOM COOL
Set the room cooling temperature while in the event.
40 to 85°F
(4.5 to 29.5°C)
Default = 85°F
(29.5°C)
SET ROOM COOL AWAY
Set the room cooling temperature while in the Away scene.
1 or 2
Default = 1
FAN MODE
Select if the fan should operate with cooling (Fan Mode 1), or
with the heating and cooling (Fan Mode 2).
OFF, On
Default = OFF
VENTILATION
Select whether or not ventilation is required. When turned On, fan
operation can be customized with the next two Fan settings.
Adjust Menu (1 of 2) *for installer use only
These settings are intended for use by the installer only and are
not required for use by average users of the thermostat.
Press and release the Mode, , and buttons together.
Press and release the Mode button to go to the next setting.
Once all settings are complete, wait 20 seconds for the thermostat
to return to normal operation.
•
•
•
ADJUST MENU
Continued on next page.
Press
+ +
Together
530 Thermostat