4. Select the event(s) for which you want to
send an e-mail.
5. To include attachments, select the type of
attachment, and then click Settings to
specify the format.
6. Set the maximum message limit and e-
mail size. When the maximum message
limit is reached, you must click Reset to
send more e-mails on event.
7. To verify that you have set up the e-mail
addresses correctly, send a test-mail by
clicking Send.
8. If necessary, click Config to access the
e-mail configuration dialog box and adjust
the configuration.
Pinpoint triggers
DPO70000SX Series User 103
To Next Page
Loading...
