Preface
This manual describes the installation and basic operation of DPO70000SX series instruments. For additional operating
information, refer to the instrument help on your instrument. The following instruments are supported by this document:
■
DPO77002SX
■
DPO75902SX
■
DPO75002SX
■
DPO73304SX
■
DPO72304SX
■
DPO71604SX
■
DPO71304SX
Key features
DPO70000SX Series instruments can help you verify, debug, and characterize electronic designs. Key features include:
■
70 GHz bandwidth and 200 GS/s on 1 analog channel and 33 GHz bandwidth and 100 GS/s on 2 analog channels,
DPO77002SX
■
59 GHz bandwidth and 200 GS/s on 1 analog channel and 33 GHz bandwidth and 100 GS/s on 2 analog channels,
DPO75902SX
■
50 GHz bandwidth and 200 GS/s on 1 analog channel and 33 GHz bandwidth and 100 GS/s on 2 analog channels,
DPO75002SX
■
33 GHz bandwidth and 100 GS/s on 2 analog channels or 4 channels at 50 GS/s, DPO73304SX
■
23 GHz bandwidth and 100 GS/s on 2 analog channels or 4 channels at 50 GS/s, DPO72304SX
■
16 GHz bandwidth and 100 GS/s on 2 analog channels or 4 channels at 50 GS/s, DPO71604SX
■
13 GHz bandwidth and 100 GS/s on 2 analog channels or 4 channels at 50 GS/s, DPO71304SX
■
Enhanced Bandwidth capability that, when enabled, applies Digital Signal Processing (DSP) filters that can extend the
bandwidth and flatten the passband. Enhanced Bandwidth provides a matched response across enabled channels when
they are at maximum sample rate. You can limit the bandwidth down to 500 MHz to optimize the signal to noise ratio.
Enhanced bandwidth is extended to the probe tip for some high performance probes and tips.
■
Record lengths up to 1,000,000,000 samples, depending on model and option
■
Up to 1.0% DC vertical gain accuracy, depending on model
■
Combine up to 4 instruments using UltraSync
™
interface for increased channel count.
■
Display user interface on an optional external monitor
■
Up to 4 analog input channels, depending on model (each with 8-bit resolution when not in Hi-Res mode), auxiliary trigger
input and output
■
Full programmability, with an extensive command set and a message-based interface
■
PinPoint triggering with flexible A and B trigger events
■
Edge trigger >20 GHz, Aux trigger > 10 GHz.
■
Selectable trigger position correction to more accurately place the trigger and reduce jitter
DPO70000SX Series User
xv