Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:HIVALue <QString>
SEARCH:SEARC
H<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMA ND:
ADDRess:HIVALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:CONDition
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL1553B:COMMAND:ADDR:
QUAL
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:VALue
Arguments
QString is a quoted string of up to 5 characters where the allowable characters are
0, 1, and X.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:MIL155 3B:HIVALue “01000” sets
the upper limit of the remote terminal address range to 01000 (when the search
condition has been set to
MIL1553B, and the qualifier has been set to INrange
or OUTrange).
SEARCH:SEARCH1:TRIGger:A:BUS:B1:MIL155 3B:HIVALue?
mig
ht return
“XXXXX”.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:ADDRess:VALue
When the MIL-STD-1553 bus search condition is set to COMMAND,andthe
qualifier is set to
LESSthan, MOREthan, EQual, UNEQua l, LESSEQual
or MOREEQual, this command specifies the value of the 5–bit remote terminal
address to be used in the search. When the MIL-STD-1553 bus search conditionis
set to
COMMAND, and the qualifier is set to INrange or OUTrange, this command
specifies the lower limit of the remote terminal address range. The default is all
X’s (don’t care).
SEARCH<x> is the search number, which is always 1, and B<x>
Conditions
This command requires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MI L1553B:COMMAND:
ADDRess:VALue <QString>
2-672 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English