Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:HIVALue
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL1553B:COMMAND:ADDR:
QUAL
Arguments
QString is a quoted string of up to 5 characters, where the allowable characters are
0, 1, and X.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:MIL155 3B:COMMAND:ADDRess:
VALue “ 01000”
sets the remote terminal address to be used in the search to
01000.
SEARCH:SEARCH1:TRIGger:A:BUS:B1:MIL155 3B:COMMAND:ADDRess:
VALue?
might return 01000.
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL1553B:COMMAND:ADDR:QUAL
When the MIL-STD-1553 bus search condition is set to COMMAND, this command
specifies the qualifier to be used with the remote terminal address field.
SEARCH<x> is the search number, which is always 1, and B<x>
Conditions
This command requires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL15 53B:
COMMAND:ADDR:QUAL {LESSthan|MOREthan|EQual
|UNEQual|LESSEQual|MOREEQual|INrange|O UTrange}
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL15 53B:COMMAND:ADDR:QUAL?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:COMMAND:
ADDRess:HIVALue
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-673

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English