Tektronix MDO4000B Series - Page 1119

Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4ENET TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:VALue
TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue
TRIGger:A:B
US:B<x>:ETHERnet:QUALifier
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:ACKnum:VALue
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:DESTinationport:VALue
TRIGger:A:
BUS:B<x>:ETHERnet:TCPHeader:SEQnum:VALue
TRIGger:A:BUS:B<x>:ETHERnet:TCPHeader:SOUrceport:VALue
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-11