Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Arguments
CH1–CH4 specifi
es an analog channel as the source waveform.
D0-D15 specifies a digital channel as the source waveform.
(MSO/MDO4000
/B models only as well as MDO3000 and MDO400C models
with option MDO3MSO or MDO4MSO installed.)
Examples
BUS:B1:LIN:SOURCE CH4 sets the source waveform to channel 4.
BUS:B1:LIN:SOURCE? might return BUS:B1:LIN:SOURCE CH1 indicating the
source waveform is channel 1.
BUS:B<x>:LIN:STANDard
Specifies the LIN bus standard to use.
Conditions
This command requires a DPO4AUTO or DPO4AUTOMAX application
module for all 4000 series models, and the MDO3AUTO application module
for MDO3000 series models.
Group
Bus
Syntax
BUS:B<x>:LIN:STANDard {V1X|V2X|MIXed}
BUS:B<x>:LIN:STANDard?
Arguments
V1X sets the LIN bus standard to V1X.
V2X sets the LIN bus standard to V2X
MIXed sets the LIN bus standard to MIXED.
Examples
BUS:B1:LIN:STANDARD V1X sets the LIN bus standard is V1X.
BUS:B1:LIN:STAND
ARD?
might return BUS:B1:LIN:STANDARD V2X
indicating the LIN bus standard is V2X.
BUS:B<x>:MIL1553B:POLarity
This command set
s the polarity of the MIL-STD-1553 bus (normal or inverted).
Conditions
This command requires a DPO4AERO application module for 4000 series models,
and an MDO3AERO application module for M
DO3000 series models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-185

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English